Introducing, Volsun’s Silicone Potting Compound, the ultimate solution for encapsulating electronic components on PCBs with ease and efficiency. This innovative product is specifically designed to provide superior protection and insulation for your valuable electronics in a variety of applications.
Made from high-quality silicone material, Volsun’s Silicone Potting Compound offers excellent resistance to extreme temperatures, moisture, chemicals, and physical shock, ensuring your electronic components are well-protected in any environment. Its flexible and durable properties make it ideal for use in a wide range of industries, from automotive and aerospace to electronics and telecommunications.
With Volsun’s Silicone Potting Compound, you can effectively encapsulate delicate electronic components on PCBs without the need for complex and time-consuming methods. Simply mix and apply the compound to the desired area, and watch as it quickly cures to create a protective barrier that will keep your electronics safe and secure.
Whether you are looking to protect sensitive sensors, relays, connectors, or other electronic components, Volsun’s Silicone Potting Compound is the perfect solution for all your encapsulation needs. Its reliable performance and excellent adhesion properties ensure a secure bond that will withstand the rigors of daily use and provide long-lasting protection for your electronics.
In addition to its superior protection and insulation capabilities, Volsun’s Silicone Potting Compound is also easy to work with, making it ideal for both professional technicians and DIY enthusiasts. Its low viscosity allows for easy application and penetration into even the smallest crevices, ensuring thorough coverage and maximum protection for your electronic components.
For a reliable and cost-effective solution for encapsulating electronic components on PCBs, look no further than Volsun’s Silicone Potting Compound. Trust in the quality and performance of this versatile product to keep your electronics safe and secure in any application. Order yours today and experience the peace of mind that comes with knowing your valuable electronics are well-protected with Volsun’s Silicone Potting Compound
Potting Compound Potting Compound for electronics silicone potting compound
Description
VS-TP2001 is a two-component 1:1 type heat-curing silicone thermally conductive liquid Formable gel material that cures at room temperature or after heating to form an elastic thermally conductive silicone rubber, specially designed for the manufacture of electrical and electronic products and modules, such as high Potting protection of power supply modules, frequency converters, sensors, etc., connection and fixation between automotive electronic devices and PCB, etc
Features
* Continuous operating temperature：-70℃~+200℃
* Excellent mechanical properties and extensibility
* Excellent thermal conductivity and aging resistance
* Low viscosity, self-leveling, excellent drilling ability
* Low modulus, low stress, good adhesion to both metals and plastics
|
|
|
|
|
|
|
|
|
Viscosity (Component A) @25℃ |
|
|
Viscosity (Component B) @25℃ |
|
|
Viscosity (After mixing) @25℃ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Component A: 0.5kg; Component B: 0.5kg |
|
Component A: 10kg; Component B: 10kg |
|
Component A: 20kg; Component B: 20kg |
|
Component A: 40kg; Component B: 40kg |
|
Component A: 50kg; Component B: 50kg |
Note：Special size and packing are available as request
Instructions* A and B components are stirred separately
* Mixing the well-stirred components A and B according to the ratio of 1:1 (volume ratio/weight ratio can be used) well
* The mixed compound is poured into the device which need to be sealed, then static curing - Can be cured at room temperature or by heating
Precautions* In order to ensure the uniform distribution of fillers, components A and B must be stirred separately before mixing, so that each compounding agent is evenly mixed.
* After A and B are mixed, they will react and cure each other, so they need to be used up after mixing, and they cannot be used twice after mixing and curing.
* When pouring into the protective part, there should be no large debris or other contaminants in the protective part to avoid affecting the mutual adhesion of the material and the object
* Before the material is fully cured, avoid other objects contacting the material, affecting the appearance and protective
performance of the material
* This product should not be in the mouth and eyes. If it accidentally enters the mouth and eyes, rinse it with water in time or go to the hospital for medical treatment.
* If need high thermal conductivity, vacuum degassing is required before pouring
* In low temperature environment, the curing time will be extended accordingly
Storage conditions Shelf life
* The product should be stored in the original packaging, keeping the lid tightly closed to avoid contamination Temperature: 15℃＜T＜30℃; Relative Humidity: RH＜70%
* Shelf life is 9 months from the date of manufacture
Suzhou Volsun Electronics Technology Co., Ltd. was founded in 2006. We keep focusing on the R&D, production and sales in insulation, sealing & protection solutions for over 18 years. Quality is our culture. Volsun has a modern quality management system, which has passed a series of quality system certification such as IATF16949, ISO9001 etc. Up to now, Volsun cooperated with customers from 88 countries, we offer suitable sealing, waterproof solutions for some well-know enterprises in communication, Automobile, Power industry etc
Q 1. How long is the payment term
A: We accept T/T 50% deposit and 50% balance against B/L or L/C copy at sight, also accept Western Union, VISA and Paypal
Q 2. What is the normal lead time for product orders
A: The average lead time for prototype/first piece is 7~10 days, if tooling is involved, the lead time for production tooling is 10 days, and the average production time after sample approval is 2-3 weeks
Q 3. What is your standard packaging
A: All goods will be packed in cartons and loaded on pallets. Special packing methods are acceptable when needed
Q 4. Can you tell us the monthly production capacity of your products
A: It depends on the model, we produce more than 1500 tons of rubber materials per month
Q 5. What kind of certificates do you have
A1: We have ISO9001:2015, IATF16949:2016, ISO14001:2015, ISO45001:2018 certified
A2: We have various rubber compounds approved by UL, ROHS and REACH
Q6: How to check the quality of bulk order
A1: We provide pre-production samples to all customers before mass production if needed
A3: We accept third-party inspection, such as SGS, TUV, INTERTEK, BV, etc
Q 9: Can you provide customized service
A: Yes, we accept customization and can produce products in different sizes, packaging, colors according to requirements.
EN
